Certified to Canadian Standards CSA 22.2 No 247 and UL235 ETL Certified.
Designed for DIY installation with simple tools in residential or light commercial applications.
Can be installed in normal pull to open inwards configuration or open outwards( push to open) configuration.
Push to open requires an additional bracket not included in the kit.
Emergency release key for emergency services access.
We strongly recommend that a surge arrestor is fitted close to the power outlet for the gate opener.
Damage to the electronic control by electric surges on the 110volts is not covered by warranty.
1 year warranty from date of purchase.
What is in the Box
- Gate opener actuator arm , 24volt motor with control cable.
- Control box with power cable.
- Hardware kit for fitting opener to gate and gate post.
- Emergency release key.
- 2 x remote controls.
- Warning safety labels
- Installation and programming manuals.
Range of accessories.
Powering options available:-
- 110-120 V AC at the gate with a GFCI.
- Low voltage cable to gate from remote power transformer in garage/house.
- Solar panels with deep cycle batteries.
- Wind turbine with deep cycle batteries.
- Dual Solar and wind with deep cycle batteries
Programmable features :-
- Soft start and soft stop ( enables high starting torque)
- Emergency release key in case of power failure
- Dual/Single gate running mode
- Adjustable opening/closing interval between master and slave gate
- Stop/Reverse in case of obstruction during gate opening/closing.
- Built in adjustable auto-close (0-99 seconds)
- Built in maximum Motor running time (MRT) adjustable for multiple safety protection (1-50 seconds)
- Digital display indicates the running situation and setting menu
- Reliable electromagnetic swing limit for easy adjustment.
- Adjustable gate obstruction sensitivity, stall force setting.
- Simple LED programming display
- Learn,Function, Increment and decrement single step programming buttons.
- Optional safety photocell detectors to monitor gate obstruction.
- Electromagnetic gate lock control input.
- Keypad input.( wired or wireless)
- Push button input
- Alarm lamp (24volt output)
- Gate safety edge sensor.
- Buried Loop detector.
- Wireless electromagnetic driveway vehicle sensor.
- 24 volt battery back up.
- Power 80W
- Motor Voltage 24V DC
- Motor Speed 16 mm /sec
- Actuator travel 385mm
- Ambient Temperature -20℃~ +50℃ (-4°F to 122°F)
- Wireless remote and keypad frequency 433.92Mhz
- Relative Humidity <=90%RH
- Gate Weight/Size ratings 290kgs (650lbs) 3.7m (12ft)